Bucket conveyor with capacity from 10-300 t/h
The machine uses a welded chain to transport the grain:● The use of a welded chain eliminates the possibility of bending of the grain transporting vanes.● The blades are welded from structural steel sheets with a thickness of 5 mm. The reinforcing bushings are used to strengthen the chain and prevent it from breaking.In addition, the following design solutions were used:● The drive station is equipped with a side inspection window for checking the volume of transported grain.
● The drive station is equipped with a system to eliminate shock stresses during start-up.The bottom of the conveyor is made of polyethylene:● 10 mm thick polyethylene significantly increases the service life of the conveyor.
● 10 mm thick polyethylene ensures quiet operation of the entire machine, eliminating the possibility of friction between metal components.
Application:The conveyor is designed for receiving and transporting grain.Product advantages:● The walls of the conveyor are made of structural galvanised steel of the MAGNELIS type.● The sheet structure is characterised by high rigidity of both the walls and all components.● The use of a galvanised protective coating with magnesium enhances corrosion protection in acid and alkaline environments.
Chain conveyor with capacity from 10 - 300 t/h
The machine uses a welded chain to transport the grain:
● The use of a welded chain eliminates the possibility of bending of the grain transporting vanes.
The blades are welded from structural steel sheets with a thickness of 5 mm.
The chain is reinforced with bushings to prevent it from breaking.
In addition, the following design solutions were used:
● The drive station has an inspection side window to check the volume of transported grain.
● The drive station is equipped with a system to eliminate shock stresses during start-up.
Application:The conveyor is designed for receiving and transporting grain.Product advantages:● The walls of the conveyor are made of galvanised sheet metal of the MAGNELIS type.● The structure of the sheet is characterised by high rigidity of both the walls and all components.● The use of a galvanised protective coating with magnesium enhances corrosion protection in acid and alkaline environments.
The bottom of the conveyor is made of polyethylene:● 10 mm thick polyethylene significantly increases the service life of the conveyor.● 10 mm thick polyethylene ensures quiet operation of the entire machine, eliminating the possibility of friction between metal components.
Belt conveyor with a capacity of 10 - 300 t/h
A rubber belt is used to transport the grain:● To extend the service life, the strength of the rubber belt is reinforced by two rigid pads.● The use of a rubber belt ensures that the grain is transported without damage or crushing.● The use of a belt with rollers significantly reduces the need for electricity.
In addition, the following design solutions were used:● The drive station has an inspection side window to check the volume of transported grain.● The drive station is equipped with a system to eliminate shock stresses during start-up.
Device description:1. Drive station 2. Tensioning station3. Transport element 3 m 4. Transport element 2 m 5. Transport element 1 m 6. Transport element 0.5 m 7. Backfill element 1 m
Application:The conveyors are designed for receiving and transporting bulk materials, mainly corn, rapeseed, wheat, etc.Product advantages:● The walls of the conveyor are made of structural galvanised steel of the MAGNELIS type.The sheet structure is characterised by high rigidity of both the walls and all components.● The use of a galvanised protective coating with magnesium enhances corrosion protection in acid and alkaline environments.Transport rollers are used in the converter:● The rollers are made of standardised cold-rolled steel, which ensures their precision.● To minimise friction forces, the highest quality bearings from the reputable manufacturer FAG are used.● The use of FAG bearings ensures that any dust that gets inside the bearings can dry out and lubricate them.
Technical data - drawing and description of the device
Belt conveyor with trolley capacity from 10 - 300 t/h
A rubber belt is used to transport the grain:● To extend the service life, the strength of the rubber belt is reinforced by two rigid pads.
● The use of a rubber belt ensures that the grain is transported without damage or crushing.
● The use of a belt with rollers significantly reduces the power requirement. In addition, the following design solutions were used:● The master station has an inspection side window to check the volume of transported grain
Device description:
1. Drive station
2. Tensioning station
3. Transport element 3 m
4. Transport element 2 m
5. Transport element 1 m
6. Transport element 0.5 m
7. Backfill element 1 m
8. Dump trolley
Application:The conveyor is designed for receiving and transporting grain.Product advantages:● The walls of the conveyor are made of structural galvanised steel of the MAGNELIS type.● The structural sheet is characterised by high rigidity of both the walls and all components.● The use of a galvanised protective coating with magnesium enhances corrosion protection in acidic environments.A moving trolley is used for smooth grain loading:● The trolley, which is mounted on a conveyor belt, is electrically driven by a gear drive.● The design of the trolley on the conveyor belt allows filling even a flat container with the transported grain.The conveyor uses transport rollers:● The rollers are made of standardised cold-rolled steel, which ensures their precision.● To minimise friction forces, the highest quality bearings from the reputable manufacturer FAG are used.● The use of FAG bearings ensures that any dust that gets inside the bearings can dry out and lubricate them.